Update emonWRT from1.5: Difference between revisions
Jump to navigation
Jump to search
(Created page with " This article will guide you to update the new emonwrt software. ==Prerequisites== * You have access to the web interface of the EmonWRT. * The EmonWRT has access to the Wor...") |
|||
| Line 9: | Line 9: | ||
==Installation Steps== | ==Installation Steps== | ||
1/ From a web browser connect to the EmonWRT using its ip address. Usually the address below if directly connected with a computer from the ethernet port. If the EmonWRT is connected to a office/home router then use the emonwrt ip address. | <b>1/</b> From a web browser connect to the EmonWRT using its ip address. Usually the address below if directly connected with a computer from the ethernet port. If the EmonWRT is connected to a office/home router then use the emonwrt ip address. | ||
http://192.168.2.1/ | http://192.168.2.1/ | ||
2/ Navigate to <b>System</b> | <b>Software</b>. Then go to the <b>Configuration</b> tab. | <b>2/</b> Navigate to <b>System</b> | <b>Software</b>. Then go to the <b>Configuration</b> tab. | ||
Revision as of 15:37, 28 July 2016
This article will guide you to update the new emonwrt software.
Prerequisites
- You have access to the web interface of the EmonWRT.
- The EmonWRT has access to the World Wide Web
Installation Steps
1/ From a web browser connect to the EmonWRT using its ip address. Usually the address below if directly connected with a computer from the ethernet port. If the EmonWRT is connected to a office/home router then use the emonwrt ip address.
http://192.168.2.1/
2/ Navigate to System | Software. Then go to the Configuration tab.