Emonwrt3 Network Configuration: Difference between revisions
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
=Connect to wifi AP= | =Connect to wifi AP= | ||
'''Network''' | '''Wifi''' | '''Scan''' | This is to connect the Emonwrt3 to an existing wifi office/home network. | ||
From the web interface go to '''Network''' | '''Wifi''' | '''Scan'''. The list of neighbouring network will be displayed. Select your network and following the step presented on the page. | |||
This action will create a new network interface for the wifi. The wired ethernet will still be present with static IP address. | |||
=Connect to wired DHCP network= | =Connect to wired DHCP network= | ||
Revision as of 22:15, 22 June 2018
PAGE UNDER CONSTRUCTION.
Default
By default the unit serves an access point with SSID set as Emonwrt3.
The IP address is 192.168.2.1 the hostname is OpenWrt.
Any device connected to the Emonwrt3 (wifi or wired) will be assigned an IP address with DHCP.
Connect to wifi AP
This is to connect the Emonwrt3 to an existing wifi office/home network.
From the web interface go to Network | Wifi | Scan. The list of neighbouring network will be displayed. Select your network and following the step presented on the page.
This action will create a new network interface for the wifi. The wired ethernet will still be present with static IP address.
Connect to wired DHCP network
Make sure the device can be accesses via wifi first.
Set unit as auto ip address.
Mesh
Coming soon.