RPICT3V1 Disable channels sketch 2: Difference between revisions

From lechacal
Jump to navigation Jump to search
No edit summary
No edit summary
Line 31: Line 31:
  debug = 96
  debug = 96


To convert form binary and back use this [https://www.cs.princeton.edu/courses/archive/fall07/cos109/bc.html webtool here].
To convert from binary to decimal and back use this [https://www.cs.princeton.edu/courses/archive/fall07/cos109/bc.html webtool here].

Revision as of 14:04, 14 February 2019


RPICT3V1 by default outputs all channels. Which are 

RealPower ApparentPower Irms Vrms PowerFactor

for all 3 Current Voltage pairs computed (ct1 ct2 ct3).

To prevent some of the channels to appear we can disable then by setting the debug variable with a particular number.

debug is coded on 8 bits where each bit correspond to the following (LSB first).

bit 1 - debug 0 = OFF 1 = ON
bit 2 - Apparent Power 1 = OFF 0 = ON
bit 3 - Irms 1 = OFF 0 = ON
bit 4 - Vrms 1 = OFF 0 = ON
bit 5 - PowerFactor 1 = OFF 0 = ON
bit 6 - ct3 1 = OFF 0 = ON
bit 7 - ct2 = OFF 0 = ON
bit 8 - ct1 1 = OFF 0 = ON

  • By default alls channels are ON and debug if OFF.

This is 00000000 in binary and 0 in decimal. 

debug = 0
  • To disable apparent power and enable debug then set bits 1 and 2 to 1

This is 00000011 in binary and 3 in decimal 

debug = 3
  • To disable ct2 and ct3 and set debug OFF

This is 01100000 in binary and 96 in decimal 

debug = 96

To convert from binary to decimal and back use this webtool here.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=RPICT3V1_Disable_channels_sketch_2&oldid=3443’