Current Transformer Conditioner: Difference between revisions
Jump to navigation
Jump to search
(Created page with " '''COMING SOON - STAY TUNED!''' The CT Conditioner allows to connect a Current Transformer to an arduino Analog pin. * Supports both current and voltage output CT. * 3.5mm ...") |
No edit summary |
||
| Line 7: | Line 7: | ||
* 3.5mm Jack connector as CT port. | * 3.5mm Jack connector as CT port. | ||
* Easily amplified by mean of a resistor. | * Easily amplified by mean of a resistor. | ||
* | * Zero offset can be set to Vcc/2 onboard. Or use an external reference. | ||
* Uses instrument amplifier for accurate result. | |||
* Provision of a burden resistor mounting for current output CTs. | |||
* Mininmum setup uses 3 wires. +5V Gnd and analog out. | |||
Revision as of 20:57, 17 February 2019
COMING SOON - STAY TUNED!
The CT Conditioner allows to connect a Current Transformer to an arduino Analog pin.
- Supports both current and voltage output CT.
- 3.5mm Jack connector as CT port.
- Easily amplified by mean of a resistor.
- Zero offset can be set to Vcc/2 onboard. Or use an external reference.
- Uses instrument amplifier for accurate result.
- Provision of a burden resistor mounting for current output CTs.
- Mininmum setup uses 3 wires. +5V Gnd and analog out.