Install or Update emonWRT: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
$ ./install_emonwrt.sh | $ ./install_emonwrt.sh | ||
5. Reboot the EmonWRT | 5. Reboot the EmonWRT | ||
=Additional Steps= | |||
stty must also be installed. | |||
$ opkg update | |||
$ opkg install coreutils-stty | |||
Revision as of 19:32, 18 May 2014
This howto shows how you can install the EmonWRT script and files on the OpenWRT OS. This can also be applied to update from an older version.
Prerequisites
WR703N is flashed with OpenWRT 12.09 Attitude Adjustment.
EmonWRT can access the internet.
Warning
The following files on OpenWRT will be overwritten. Do NOT follow this if you want to preserve them.
- /etc/config/firewall
- /etc/rc.local
- /etc/inittab
Steps
1. Log in the EmonRWT/WR703N via SSH.
2. Download the installer script with the foillowing command:
$ wget http://lechacal.com/EmonWRT/system/v1.1/install_emonwrt.sh
3. Change permissions.
$ chmod 755 install_emonwrt.sh
4. Run the installer:
$ ./install_emonwrt.sh
5. Reboot the EmonWRT
Additional Steps
stty must also be installed.
$ opkg update $ opkg install coreutils-stty