Update emonWRT from1.5

From lechacal
Jump to navigation Jump to search

This article will guide you to update the new emonwrt software.

Prerequisites

  • You have access to the web interface of the EmonWRT.
  • The EmonWRT has access to the World Wide Web

Installation Steps

1/ From a web browser connect to the EmonWRT using its ip address. Usually the address below if directly connected with a computer from the ethernet port. If the EmonWRT is connected to a office/home router then use the emonwrt ip address. 

http://192.168.2.1/

2/ Navigate to System | Software. Then go to the Configuration tab.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Update_emonWRT_from1.5&oldid=1057’