Update emonWRT from1.5
This article will guide you to update the new emonwrt software.
Prerequisites
- You have access to the web interface of the EmonWRT.
- The EmonWRT has access to the World Wide Web
Installation Steps
1/ From a web browser connect to the EmonWRT using its ip address. Usually the address below if directly connected with a computer on the ethernet port. If the EmonWRT is connected to a office/home router then use the emonwrt ip address.
http://192.168.2.1/
2/ Navigate to System | Software. Then go to the Configuration tab. There you will see the repository configuration. Replace everything in the text box using the text below:
dest root / dest ram /tmp lists_dir ext /var/opkg-lists option overlay_root /overlay src/gz barrier_breaker_base http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/base src/gz barrier_breaker_luci http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/luci src/gz barrier_breaker_packages http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/packages src/gz barrier_breaker_routing http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/routing src/gz barrier_breaker_telephony http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/telephony src/gz barrier_breaker_management http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/management src/gz barrier_breaker_oldpackages http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/oldpackages src/gz barrier_breaker_lechacal http://lechacal.com/repo