Current Transformer Conditioner

From lechacal
Revision as of 20:57, 17 February 2019 by Administrator (talk | contribs)
Jump to navigation Jump to search

COMING SOON - STAY TUNED!

The CT Conditioner allows to connect a Current Transformer to an arduino Analog pin.

  • Supports both current and voltage output CT.
  • 3.5mm Jack connector as CT port.
  • Easily amplified by mean of a resistor.
  • Zero offset can be set to Vcc/2 onboard. Or use an external reference.
  • Uses instrument amplifier for accurate result.
  • Provision of a burden resistor mounting for current output CTs.
  • Mininmum setup uses 3 wires. +5V Gnd and analog out.
Retrieved from ‘http://lechacal.com//wiki/index.php?title=Current_Transformer_Conditioner&oldid=3466’