Forwarder debug

First of all connect to the emonWRT with SSH. Use [Putty http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe] program if you are on windows. Just open a terminal in Linux.

For this you will need to issue the ps command to find the process number of the forwarder program: $ ps | grep emon

From the output of this command you should see a line with /usr/bin/emonwrt_forwarder.sh. Take a note of the first number on that line (say it is 1280). It should look like:

1280 root      1536 S    {emonwrt_forward} /bin/sh /usr/bin/emonwrt_forwarder.sh

then kill the process with: $ kill 1280

Then run the process manually like so: $ /usr/bin/emonwrt_forwarder.sh