Update RPICT firmware (CT7V1/CT4V3/CT8)

From lechacal
Revision as of 12:01, 2 April 2018 by Administrator (talk | contribs) (Created page with " ==Download Sketch== Download the sketch from the dedicated page for the board. ==Sketch Upload== ===Using Nanoprog=== One can program the board using the NanoProg_v1 | N...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Download Sketch

Download the sketch from the dedicated page for the board.

Sketch Upload

Using Nanoprog

One can program the board using the Nanoprog programmer with a 6pin SPI connector.
In Arduino IDE select board as Arduino Uno. Upload sketch using File | Upload Using Programmer.

Using an ArduinoUNO

An Arduino UNO board can be used to program the chip. The micontroller should be removed from the RPICT7V1 board and fitted on the Uno to allow programming.

Erasing EEPROM

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Update_RPICT_firmware_(CT7V1/CT4V3/CT8)&oldid=2345’