Upload Arduino sketch to Atmega328

From lechacal

Revision as of 14:38, 12 October 2018 by Administrator (talk | contribs) (→‎Preliminaries)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Overview

This is a guide to upgrade a sketch on atmel atmega328 chip.

Involved product are RPICT8, RPICT7V1, RPCT4V3, Emonwrt3.

Preliminaries

Required hardware is the Nanoprog.

The board hosting the Atmega328 chip will have an ISP connector (In System Programmer). This is a 6 pin connector as 3x2.

Required software is the Arduino IDE.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Upload_Arduino_sketch_to_Atmega328&oldid=2994’